Transceivers can use a wide variety of frequencies and you need to pick ones that won’t be used by other services on the coaxial cable (e.g. But throughput around 500Mbit/s is definitely achievable, which makes these good options for many households. It is backward compatible with the older HomePlug AV standard, but is not compatible with other kinds of powerline networks.Īlthough products advertise speeds up to 1.3Gbit/s, don’t expect to actually realize these speeds. The key specification for powerline networking these days is HomePlug AV2. Many 10G Ethernet ports (including the ones Apple ships) also support 2.5Gbit and 5Gbit operation, which should work more reliably than 10Gbit speeds if your cables and connections are not completely up to spec. In addition to needing certified connectors, there are a lot of fiddly things you need to get right in order for the entire cable to support that bandwidth over the maximum distance. To reach the maximum distance of 100m, you need to use Category 6A cable, which is a bit more expensive.Īnd don’t try making your own Cat 6/6A cables. Cat 6 cable is only rated for 10Gbit/s over shorter distances (up to 55m, but I wouldn’t push it that far).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |